Polyurethane Catalyst DABCO T 12 Dibutyltin Dilaurate DBTDL Dibutyltin Dilaurate

Parameters

• Promotes rapid gelation and reduces the time required for the mixture to become non-sticky

• Improves the mechanical properties of polyurethane block foam and moulded foam

Recommendations for Use：

Application of DABCO T12 Organic Tin Catalyst in the Production of Rigid Polyurethane Foam

In applications where amine catalysts exhibit insufficient activity, the additional activity obtained through the synergistic combination of the DABCOT12 organic tin catalyst and the amine catalyst enables the required rapid catalysis. The DABCOT12 organotin catalyst is suitable for high-density structural foam, spray-applied rigid foam and rigid panels for sandwich panels. Even at low dosages as low as 0.1 pphp, the DABCOT12 organotin catalyst is particularly effective in promoting rapid gelation and achieving a short ‘no-stick’ time.

Applications of the DABCOT 12 organotin drying agent in polyurethane paints and coatings

The DABCOT 12 organotin drying agent can be used as a drying agent in both single-component moisture-curing coatings and two-component polyurea coatings, making it highly versatile. It is suitable for a wide range of polyurethane coatings.

Storage & Package

It is recommended that the organic tin catalyst DABCOT-12 be stored in a dry, cool and well-ventilated place. All storage containers must be tightly sealed to prevent contact with water or other substances that may affect the product, as this could alter its performance in end-use applications. The optimum storage temperature is between 10°C and 30°C. Temperatures lower or higher than this range are unsuitable and should be avoided wherever possible.